Miller Multimatic 235 Multiprocess Welder w/EZ-Latch Running Gear 951846
Code: 951846
Miller Multimatic® 235 Multiprocess Welder w/EZ-Latch™ Dual Cylinder Running Gear 951846
The Miller® Multimatic® 235 with EZ-Latch™ single cylinder running gear is a 235 amp, portable multi-process welder that is capable of MIG, Flux-cored, DC stick, DC Lift-Arc™ TIG and Pulsed TIG welding. It is the first-ever Miller welder that functions with any OPTIONAL Miller Spoolmatic® or Spoolmate™ spool gun. For Spoolmate 200 and all Spoolmatic models, Auto-Gun Detect® automatically detects which gun (MIG or Spool) is being used and allows you to switch between MIG gun and spool gun by simply pulling the trigger. Spoolmate 100 and Spoolmate 150 spool guns can also be used with the Multimatic 235, but the Auto-Gun Detect® feature will not work with these spool gun models. Both the Spoolmate 100 and 150 need to be plugged into the 235's MIG gun receptacle in order to function properly.
The Multimatic® 235 comes complete with full color 4.3 inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and DC TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. The 235 also features a built in program for stainless steel MIG welding that uses Argon 98%/CO2 2% as the shielding gas. This will save hundreds of dollars per cylinder over using helium mix shielding gases for your stainless steel MIG applications.
EZ-Latch™ running gear with single cylinder rack gives unmatched portability to the Multimatic 235. For moving around the shop, your 235 welder attaches to the running gear through a series of four, quick-disconnect latches. For times when your 235 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 235 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit.
NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in four steps and include: cart with front caster wheels, single cylinder tray with rear wheels, single cylinder post and gun & cable rack.
The Multimatic® 235 runs on 240V single-phase input power. It comes complete with MDX™-250 MIG gun, electrode holder, clamp, flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and material thickness gauge.
Processes
MIG (GMAW)
Flux Cored (FCAW)
DC Stick (SMAW)
DC Lift-Arc™ TIG (GTAW)
Pulsed TIG (GTAW-P)
Features
Available for MIG, stick and DC TIG processes with the ability to fine-tune your settings.
Set weld parameters by selecting:
MIG - wire and gas type, wire diameter and material thickness
Stick - electrode type, electrode diameter and material thickness
DC Lift-Arc™ TIG (shown) - remote on/off, tungsten diameter and material thickness
DC Pulse - adjustable from Off-150 pulses per second (PPS)
TIG Post-Flow - adjustable from Auto-25 seconds (accessible through service menu screen 13)
DC Lift-Arc™
Tungsten size selection
Dual-locked, front-loading liner optimizes wire feedability
Install AccuLock contact tips with a single turn
AccuLock liner locks at front and back of gun to align with contact tip and power pin, resulting in a flawless wire feed path
Durable, ergonomic handle with overmolding improves grip and comfort
Ball-and-socket handle with rear swivel for increased gun maneuverability and decreased welder fatigue
Specs
This is a DC only machine. It cannot TIG weld Aluminum
Comes complete with
Miller Millermatic/Multimatic 235/255 Protective Cover 301521
Miller® Millermatic®/Multimatic™ 235/255 protective cover protects the finish of your Miller 235/255 MIG/mulit-process welder.
Miller Multimatic 235/255 TIG Kit 301518
Miller® Multimatic® 235/255 TIG Kit with foot control provides everything you need for remote TIG welding with Multimatic™ 235 and 255 multiprocess welders.
Miller EZ-Latch Dual Cylinder Rack w/Gun & Cable Rack 301481
Miller® EZ-Latch™ dual cylinder cylinder rack with elevated gun and cable rack attaches to the EZ-Latch running gear when multiple shielding gases are required.
Miller Spoolmate 200 MIG Spoolgun 300497
Free
Get ten FREE 1 lb spools of aluminum MIG wire with purchase.
Expires: While supplies last.
See more
Miller® Spoolmate™ 200 MIG Spoolgun is a highly reliable and economical spool gun with excellent feeding of aluminum MIG wire.
Miller Spoolmatic 30A Spoolgun 130831
Free
Get twelve FREE 1 lb spools (1 case) of aluminum MIG wire with purchase.
Expires: While supplies last.
See more
Miller® Spoolmatic® 30A with 30 ft. leads, is a 200 amp MIG spoolgun designed for the professional welder.
Miller Spoolmate 150 Spoolgun 301272
Free
Get four FREE 1 lb spools of aluminum MIG wire with purchase.
Expires: While supplies last.
See more
Miller® Spoolmate™ 150 Spoolgun is a 150 amp spool gun designed specifically for your Millermatic® 211 or Multimatic™ 215 welder.
Miller Spoolmate 100 MIG Spool Gun 300371
Free
Get two FREE 1 lb spools of aluminum MIG wire with purchase.
Expires: While supplies last.
See more
Miller Spoolmate™ 100 MIG is a reliable and economical direct connect spool gun for Millermatic® 140, 180 and 211 MIG welders and Multimatic™ 200 and 235 multi-process welders.
Miller 10-Pin To 14-Pin Adapter Cord 301545
Genuine Miller® 10-pin machine plug to 14-pin remote control adapter cord allows you to hook your Miller remote control with a 14-pin plug to the 10-pin remote receptacle on Miller® Multimatic™ 255 multi-process welder
Southwire 230 Volt Extension Cord - 25 ft. 8/3 019178806
Genuine Southwire® 230 Volt Welder Extension Cord features 25' of 8/3 power cable with lighted NEMA 6.50 male plug and female receptacle at each end.
Southwire 230 Volt Welder Extension Cord - 50 ft. 8/3 019228806
Genuine Southwire® 230 Volt Extension Cord features 50' of 8/3 power cable with lighted NEMA 6.50 male plug and lighted female receptacle at each end.